MUTOH Rockhopper II Series Betriebsanweisung PDF herunterladen (Seite 69)

Handling Roll Media – User’s Guide

AP-75100, Rev. 2.0, 26/11/04

Step 6 :

Remove the rear cover on the right mounting bracket. Remove the 3 screws holding the operation panel. Put the operating panel aside.

BE CAREFUL NOT TO DAMAGE THE CABLES LEADING TO THE PANEL.

Assemble the 4 shafts. On the right hand side, assemble 2 detection lips on each shaft, each detection should be in the gap of the sensors. Do not tighten the set

screws on the sensor lips.

1 2 ... 64 65 66 67 68 69 70 71 72 73 74 ... 94 95

User’s Guide 1
COPYRIGHT NOTICE 3
TABLE OF CONTENTS 7
1. SAFETY INSTRUCTIONS 9
AP-75100, Rev.2.0, 26/11/04 10
2. SCROLLER RECEIVER 11
RECEIVER 15
Paper End 18
Heaters Cleaning 18
3. WINDER 30 23
3.1.2. Contents of 24
3.2.3. Connecting the cables 32
3.3. WASTE BOTTLE 33
3.4.1.1. Winder 30 36
3.4.1.2. Operation Panel 37
3.5. LOADING ROLL MEDIA 39
Step 1 : Turn the power ON 40
4. UNWINDER / WINDER 100 43
4.3.1.2. Operation Panel 52
4.4. ASSEMBLY 54
Step 1 : 56
Step 2 : 57
Step 3 : 58
Step 4 : 59
Step 5 : 60
Step 6 : 61
Step 7 : 62
Step 8 : 71
AP-75100, Rev. 2.0, 26/11/04 72
Step 2 : Lock the casters 73
1. Adjust the stop sensor 75
2. Adjust the start sensor 76
4.5.6. Stop Sensor Position 81
4.5.7. Start Sensor Position 82
4.7. LOADING ROLL MEDIA 89
UNWINDER/WINDER 100 94

Kommentare zu diesen Handbüchern

Keine Kommentare

MUTOH Rockhopper II Series Betriebsanweisung Seite 69

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Drucken & Scannen MUTOH Rockhopper II Series